The Probe is a clamp-on AC current probe that is designed and tested according to IEC Publication 1010-2-032 (1994. 12) (Overvoltage Category III), safety requirements for
Hand-held current clamps for electrical measurement and test, the EMC Directive (EN 50081-1 and EN 50082-1), and other safety standards.
CS Current sensing
2011年 3月 24日(木曜日) 04:35
Features:
- Easy installation
- Wide measuring range
- Accurate current sensing
- 4-20 mA output signalr
Technical Data:
| Technical data Current Sensor CS 504 | |
|---|---|
| Current Ranges | 0A to 1000A AC |
| Output Signals | 4mA to 20mA DC |
| Accuracy | (up to 400Hz) ± (2% of rdg +5) |
| Working Voltage | 600V rms |
| Common Mode Voltage | 30 V AC |
| Storage Temperature | -20 ºC to 60 ºC (-4 ºF to 140 ºF) |
| Operating Temperature | 0 ºC to 45 ºC (32 ºF to 113 ºF) |
| Altitude | 0 to 2000 meters (0 to 6560 feet) |
| Relative Humidity | 0% to 80% (0 ºC to 35 ºC; 32 ºF to 95 ºF) 0% to 70% (35 ºC to 45 ºC; 95 ºF to 113 ºF) |
| Maximum Conductor Size | One 51 mm (2.0 inch) |
| Maximum Jaw Opening | 52 mm (2.04 inch) |
| Dimensions | 205 x 97 x 44 mm (8.07 x 3.82 x 1.73 inch) |
| Weight | 480g (16.9 oz.) |
Application:
- Current sensing at compressors for load / Unload analyzes
- Current sensing for power / Energy measurement
- Evaluation of machine operation hours
Order. No:
| 型番 | 製品名 |
|---|---|
| 0554 0504 | Clamp-on current sensor CS 504 0-1000A, for DS 300-P |
| 0554 0505 | Clamp-on current sensor CS 504 0-1000A, for DS 300 (open end wires) |
Read 3574 times
|
Published in
Other Sensors
Social sharing
Download attachments:
- Datasheet Current sensing (57 download)
- Instruction manual Current sensing (58 download)